個人登錄
PE工程師/制程工藝工程師/制造工程師 10-15K No.3754284
- ME|
- 1人|
- 廣東東莞
- |1天8小時前刷新
- 學歷要求
- 本科|
- 工作經驗
- 4年|
- 現居住地
- 不限
職位介紹
1. Responsible for the process issues from PD/NPI to mass production.
負責從產品開發/新產品導入到量產的過程問題；
2. Responsible for process design and implementation, process improvement.
負責工藝設計和實施，工藝改進；
3. Responsible for new production introduction, pilot run and abnormal solving.
負責新產品的導入、試產及異常處理；
4. Leader the new production line setup and qualification. Also new tooling qualification.
領導新生產線的建立和確認，還有新的工裝確認；
5. Prepare related engineering document, Such as BOM/SOP/MIP/DFM/PFMEA.
準備相關工程文件，如BOM/SOP/MIP/DFM/PFMEA；
6. Work with IE engineer to optimize process for production line.
與IE工程師一起優化生產線工藝；
7. Responsible for standardization of process and technology for production line.
負責生產線工藝和技術的標準化。
Job requirements
崗位要求：
1. College degree or above in mechanical engineering, product design or related.
本科學歷，機械工程，產品設計或相關專業；
2. At least 3 years working experience, 2 years process control experience is preferred.
3年以上工作經驗，2年工藝控制經驗優先；
3. Familiar with manufacturing process and machining process, able to do abnormal analysis and troubleshooting.
熟悉制造工藝和機加工工藝，能夠進行異常分析和故障排除；
4. Special case improvement experience.
特殊案例改進經驗；
5. Experience of new fixture introduction in production line.
有生產線新夾具導入的經驗；
6. Experience in leather production is preferred.
有相關皮革生產經驗者優先；
7. Good English speaking, reading and writing skills.
6532 1123-0|170 1682 2638 75 良好的英語聽說讀寫能力。
負責從產品開發/新產品導入到量產的過程問題；
2. Responsible for process design and implementation, process improvement.
負責工藝設計和實施，工藝改進；
3. Responsible for new production introduction, pilot run and abnormal solving.
負責新產品的導入、試產及異常處理；
4. Leader the new production line setup and qualification. Also new tooling qualification.
領導新生產線的建立和確認，還有新的工裝確認；
5. Prepare related engineering document, Such as BOM/SOP/MIP/DFM/PFMEA.
準備相關工程文件，如BOM/SOP/MIP/DFM/PFMEA；
6. Work with IE engineer to optimize process for production line.
與IE工程師一起優化生產線工藝；
7. Responsible for standardization of process and technology for production line.
負責生產線工藝和技術的標準化。
Job requirements
崗位要求：
1. College degree or above in mechanical engineering, product design or related.
本科學歷，機械工程，產品設計或相關專業；
2. At least 3 years working experience, 2 years process control experience is preferred.
3年以上工作經驗，2年工藝控制經驗優先；
3. Familiar with manufacturing process and machining process, able to do abnormal analysis and troubleshooting.
熟悉制造工藝和機加工工藝，能夠進行異常分析和故障排除；
4. Special case improvement experience.
特殊案例改進經驗；
5. Experience of new fixture introduction in production line.
有生產線新夾具導入的經驗；
6. Experience in leather production is preferred.
有相關皮革生產經驗者優先；
7. Good English speaking, reading and writing skills.
6532 1123-0|170 1682 2638 75 良好的英語聽說讀寫能力。
- 年齡要求：25-35歲
- 工作地址：
-
廣東東莞高埗鎮三聯村佰旺科技園卡士莫實業東莞有限公司3B廠 查看地圖
- 面試地址：
- 廣東東莞Xiansha Industry Zone, Gaobu Town, Dongguan City , Guangdong Province , PRC
求職安全提示舉報
- 求職中如遇招聘方扣押證件、要求提供擔�；蚴杖∝斘铮ㄈ绲盅航�、培訓費等）、強迫入股或集資、收取不正當利益或其他違法情形，請立即舉報，并保留證據，維護自身合法權益。
- 如遇職位要求赴海外工作，請提高警惕，謹防詐騙。
